Join
Our emailing List
HOME
pack
store
contacts
this
month in scouting
fundraising
about
cub scouting
being
a cub scout
activities
& events
your
uniform & awards
leader
resources
den
pages
knots
links
downloads
|
|
Rolling Hitch
 
 
 
 
- Also known as the Magner's Hitch and Magnus Hitch
- One of the most underrated knots in Scouting and Guiding, the
Rolling hitch is used to attach one rope to a second, in such a manner
that the first rope can be easily slid along the second.
- The knot can be considered a Clove hitch with an additional turn.
- When tension is applied and the ropes form a straight line, the
rolling hitch will lock onto the first rope. When the tension is
released, the hitch can be loosened and slid along the first rope to a
new location.
- The tension must be applied on the side of the knot with the extra
turn.
- Tip. Use this knot if you have a guy rope with no adjuster. Create a
loop on the end of a second rope which is slipped over the peg. Use a
rolling hitch to attach the second rope to the guyline. Alternatively,
take the guyline around the peg and tie the Rolling hitch back onto the
standing part of the guyline, above the peg, thus forming an adjustable
loop. This is known as the Tautline Hitch in America.
- Tip. Use this knot when constructing camp gadgets such as a
suspended table. A Rolling hitch in each suspension rope will allow easy
adjustment and a level table!
- Tip. When adjustments are complete, lock the rolling hitch into
place by using a stop knot such as a Figure of Eight in the first rope,
below the Rolling hitch, to stop it slipping.
|